To connect to external display

Connect the cables to the Multi Use connector / Video Out port on the bottom side of the system.

Connect the other ends of the cable to the back of the display, making sure to select the appropriate video input ports for that particular display.

Turn on the display and access the appropriate video inputs (i.e., Video 1, 2, 3, etc. or Line/Input 1, 2, 3, etc.).

Turn on the PSPgo / PSP system and press and hold the [Display] button on the front of the console for at least five(5) seconds. If successful, this will bring up an image on the display and the LCD screen on the system will black out.


Things to note:
To clear the video output, press the [Display] button again.

You can output video in progressive scan only with the Component AV Cable (SCPH-98550 or SCPH-98563). To change this setting, go to (Settings) > [Connected Display Settings] > [Component / D-Terminal Output] and select "Progressive".

You may select the TV type that the PSPgo / PSP system will output. Either 16:9 format or 4:3 format. You can change this setting by going to (Settings) > [Connected Display Settings] > [TV Type].

Composite AV cables (SCPH-98548) can output games to a TV only with the PSP-3001. You will not be able to with the PSP-2001 and the message "To display this screen on a connected device, you must be connected using a component AV cable or a D-terminal AV cable and you must output the video content in progressive format." will appear.